[mic0001]

0

I’ve following the instructions on the page [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I’ve tried the 3 methods
Repair [No Ca Found] - Fix Bad Sector "Sectors Recovery" and Flashing by Null modem cable only without Network lan

I’ve still the following message on the screen of my DM
Sim201 Team 84B EEROR1: NO CA FOUND

I tried to flash my DM with DreamBox- OptiFlasher-Pro-E2-v1.0.9b - DreamUP_1_3_3_11

Using an :
clone image – last original DM image – image from else were

try also to repair with tool NCF SIM2 v2.5 for No Ca Found

I’ve receive five differents messages

1- Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
2- box is flashing from its memory...
3- Socket error # 10060 Connection timed out
4- Invalid file name
5- Finalizing Job Phase2…. Please Wait… (and then nothing append)

Thanks to see that again please please

Best regards

Also I’ve this log

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.10.15 13:22:13 =~=~=~=~=~=~=~=~=~=~=~=
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox D M800
FIRST STAGE 1.00 {BO23456}
[m
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000133,00000133}
0.007 - fp init
0.008 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

[fairbird]

0

Read this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and this
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[mic0001]

0

first thank you
I've tried but...
-NFI Image File Size not Authorized ! Aborted!

[mic0001]

0

Thank you it's working after 5 of searching my self. Thank you,Thank you,Thank you,Thank you,Thank you,Thank you,Thank you,Thank you,

[fairbird]

0

Closed Under Solved