Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • ¡Welcome to InfoServ!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: bricked?? dm800hd se
Thread Modes
#1
0
seems like my dm800hd se is bricked or something been trying now for 2days to fix it.

Its a8p simcard.

ive tried sunray/dreamup some repair tools but nothing

this is what happend or doesent happens in optiflash.

nothing happens when i try to flash with the optiflash, (using only nollmodem)

it seems i cant even fix bootloader no nothing

after i press flash it just says enter ip number in front of the box, but i doesent get any ip number. it still just says err1 noca found.

ive used hyperterminal now and this is what i get.

© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SE

FIRST STAGE 1.0/400 {BO23456}

2ND STAGE OK, build #82 (2011-02-25)

0.000 - BCM board setup
0.000 - fp init
0.000 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
0.608 oled: string too long: '* ERR01: NO CA FOUND'
¨

anything suspicious? :S
 
Reply
#2
0
No one? :/
 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)