[brianmullen8]

0

Dm800hd
sim 2.01
Clone
No ca found

I have tried optiflasher and nfc both say repaired but I still get no ca found.

weird thing is if I unplug the box while it is uploading the flasher and then plug it back in it will boot the box with no issue.

I have tried a few different ssl and images all results the same

here is a HyperTerminal output
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000133,00000133}
0.007 - fp init
0.008 - ca init
cannot read payload
error in receive
error during t1 transfer - read challenge
cannot read payload
error in receive
error during t1 transfer - read challenge
cannot read payload
error in receive
error during t1 transfer - read challenge
cannot read payload
error in receive
error during t1 transfer - read challenge
cannot read payload
error in receive
error during t1 transfer - read challenge
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

[fairbird]

0

Here how to fix (No Ca Found)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Also if box does not recognized with optiflasher try another cable and another pc ...

[fairbird]

0

Closed Not Followed ...