[birkalog]

0

Hello,
I have a little problem.
I can not fix No ca anymore,
I use Dreambox Optiflasher Pro V1.0.8 Enigma2
When i try to repair its giving me an IP that i not use in my lan (192.168.1.77)
Its sending flash loader
after that it says : second stage ok
Boot success & ready for network Web Interface!
and i get small window that says Enter IP shown on ***Stop MODE***
And its all the same ip 192.168.1.77
When i put in ip i get
Error: Socket Error # 10054
Connection reset by peer.
I have turned off everything and started everything again put same result.
It is the same on every DM 800 HD i try

Please help

---

It lokks like this:
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Error: Socket Error # 10054
Connection reset by peer.
When i turn off the power and turn it on again the box says
error01: NO CA found

[fairbird]

0

Try to download last version Optiflasher 2.0c and put the software in same folder for ptiflasher Pro V1.0.8 then you well see the new version is come pro.
Any way..
You don't mentioned your box is Clone or Genuine? and if Clone what kind of sim?
Try to flash your box bootloader by use "Flashing by Null modem cable only without Network lan" method and then unplug box and plug it again if fix it, it is fine if not try same method and flash image with bootloader and make sure for image compatible with your box..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[birkalog]

0

I have a clone
sim i think is 2.01 (does it say on the sim?)
Can you please tell me witch is the last version of Optiflasher 2.0c or better, where do i find it?

[fairbird]

0

Optiflasher 2.0.0c
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[birkalog]

0

[Hello,
Downloaded the 2.0c version and got exactly the same response like the last time.
What kind of mistake am I doing?

[fairbird]

0

Please upload here some pictures fro your steps..

[birkalog]

0

Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Error: Socket Error # 10054
Connection reset by peer.

---

When i try:
Did you try to use [Advanced Mode2] ?
i get:
Invalid filename

[fairbird]

0

Your Problem from Socket..maybe from pc com or null cable or dreambox com...
Try with another cable and another pc with xp win better..