0
-DM800se
-Clone
-SIM2.10
HELO I tried that I find in this forum as a solution to fix the problem here is an example
Hyper terminal
FIRST STAGE BE3E3E3E3E3 1.0/400 {} Second stage loader was not found. Do not panic - it's not a (real) problem. You do not need to repair your Dreambox. It just means that the FlashROM with The graphical menu was erased. You can restore this with a tool like DreamUP with serial access. RESCUE {012}
Mini-FlashUp, build # 84 (01/09/2011)
0000 - BCM board setup
0000 - fp init
0000 - ca init
ATR is too short
ATR is too short
ATR is too short
ATR is too short
ATR is too short
CA disabled
OLED found!
Color OLED reset
NO CONFIGURATION DATA PRESENT. STOP.
LCD: * In the BIOS NO CA FOUND
1385 OLED: string too long: '* In the BIOS NO CA FOUND'
I tried all possible ways I know that the BOOT # 79 THANK YOU
-Clone
-SIM2.10
HELO I tried that I find in this forum as a solution to fix the problem here is an example
Hyper terminal
FIRST STAGE BE3E3E3E3E3 1.0/400 {} Second stage loader was not found. Do not panic - it's not a (real) problem. You do not need to repair your Dreambox. It just means that the FlashROM with The graphical menu was erased. You can restore this with a tool like DreamUP with serial access. RESCUE {012}
Mini-FlashUp, build # 84 (01/09/2011)
0000 - BCM board setup
0000 - fp init
0000 - ca init
ATR is too short
ATR is too short
ATR is too short
ATR is too short
ATR is too short
CA disabled
OLED found!
Color OLED reset
NO CONFIGURATION DATA PRESENT. STOP.
LCD: * In the BIOS NO CA FOUND
1385 OLED: string too long: '* In the BIOS NO CA FOUND'
I tried all possible ways I know that the BOOT # 79 THANK YOU
