0
Hey guys, I have great problemmer restore my box to normal.e
There was installerret open pli boot image 84b.
So I will try the second image, just to see the picture quality, and I installed OpenBlackHole_dm800se_SSL82_DTS_CrossEPG_Cron_DEBHGUI_with_AUTO-DVBT_DynDNS_v4_Jan2012.
I was not happy with it and I restored fabric indstilling in menu.
After I got NO CA FOUND.Har tried NCF, but it hung during fase2.
So I tried optiflasher V 1.0.8b which upload boot, and after when I would flash the open pli 2.1 beta, the stoper only, and after 5min waiting when I press the do jobs, it starts over again with boot84.
On box display showing ip:192.168.1.77 serial setup
Here is on Optiflash window:
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: OpenPLi-2.1-beta-dm800se-20120526-sim210-ssl84b.nfi
FSize: 45521584 bytes
My box is genuine dm 800 se
Hope you can help me.
Thanks in advance
There was installerret open pli boot image 84b.
So I will try the second image, just to see the picture quality, and I installed OpenBlackHole_dm800se_SSL82_DTS_CrossEPG_Cron_DEBHGUI_with_AUTO-DVBT_DynDNS_v4_Jan2012.
I was not happy with it and I restored fabric indstilling in menu.
After I got NO CA FOUND.Har tried NCF, but it hung during fase2.
So I tried optiflasher V 1.0.8b which upload boot, and after when I would flash the open pli 2.1 beta, the stoper only, and after 5min waiting when I press the do jobs, it starts over again with boot84.
On box display showing ip:192.168.1.77 serial setup
Here is on Optiflash window:
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: OpenPLi-2.1-beta-dm800se-20120526-sim210-ssl84b.nfi
FSize: 45521584 bytes
My box is genuine dm 800 se
Hope you can help me.
Thanks in advance