[blowagie]

0

Hi all,

I do have a DM800se (High 024 RevD6) with a sim210 which appears to be dead. Only some red leds in the receiver and one green on the tuner. Symptoms:
- 1st power on only display active on DM. Bootlog in attachment (cold_boot.txt)
- 2nd power on no display. Bootlog in attachment. (boot2.txt)
- 3th power on no display. Boolog in attachment. (boot3.txt)
- 4th and so on: always bootlog boot3.txt
- If I wait 15 minutes before power on than I can start over again (cold_boot.txt)
I tried optiflasher in advanced mode 2 because network is dead. Results in Word attachment. I always get disconnected while ‘sending flash loader’. I also have to wait 15 minutes between each try, otherwise I have‘wrong boot response’ or no response at all.

Other things I did:
- 2 different pc’s; Win8 & Win7
- 2 differen usb cables
- Reseat the SIM210 card.
- Used the SIM210 card in my DM800HD (with sim201 card). In my DM800HD, I receive ‘No CA found’ with sim210 card which is normal and indicates that the SIM210 is ok.
- Tried the sim201 card in the dm800se with the same problem: dead.
- Tried to flash without tuner and without display.
- other PSU

No idea what is wrong. Any help is welcome.

Bart