Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • ¡Welcome to InfoServ!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Estar V3
Thread Modes
#1
0
Hi my mate had a NO CA ERROR on his DM800se estar V3 sim, i have flashed this image Estar_OpenBlackHole_ES800se_yassinov and its got it back to life, if i try to flash any other image i get this message through web browser in the progress bar i get CRC check skipped.

INVALID IMAGE (OR OLD VERSION)

then i tried through dreamup 137 from the estar site i can flash #84 then when i try to flash an image i get that message.

i want to install dreamelite image

this is the message from dreamup 1.3.3.7
13:36:08 box type: DM800SE
13:36:36 Calculating checksum...
13:36:36 Uploading file to box...
13:36:36 box is flashing from its memory...
13:36:37 OK, flash-copy succeeded
13:36:54 Calculating checksum...
13:36:55 Uploading file to box...
13:37:17 box is flashing from its memory...
13:37:19 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
 
Reply
#2
0
If you get this error message { INVALID IMAGE (OR OLD VERSION) }
So, should be to flash first last bootloader for your sim then close box after that flash new image ...
 
Reply
#3
0
no this does not work if i flash an #82 or #84 first switch off then switch back on and when i try to install any other image i get this error Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!

the only image i can flash is Estar_OpenBlackHole_ES800se_yassinov but this keeps getting a green screen and going into a boot loop

the sim is e-star SIM V3 DM800se
 
Reply
#4
0
So, try to flash any new image by using fix bad sectors by using optiflasher
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

or by dreamup for e-star...
 
Reply
#5
0
same problem
19:37:29 box type: DM800SE
19:37:29 Enabled recovery of bad sectors
19:38:00 Calculating checksum...
19:38:00 Uploading file to box...
19:38:18 box is flashing from its memory...
19:38:20 Log: +++ 015 bad sector recovery enabled
19:38:20 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!

that was with this image downloaded from estar site
estar-dm800se-nemesis2.6.nfi
 
Reply
#6
0
1-Flash bootloader 82 by bad sector recovery
2-Again flash last bootloader by bad sector recovery
3-Try to flash new image...if still issue then ask the E-star supported here
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
 
Reply
#7
0
09:30:02 box type: DM800SE
09:30:02 Enabled recovery of bad sectors
09:30:16 Calculating checksum...
09:30:16 Uploading file to box...
09:30:16 box is flashing from its memory...
09:30:17 Log: +++ 015 bad sector recovery enabled
09:30:17 OK, flash-copy succeeded

Flashed #82

09:30:47 box type: DM800SE
09:30:47 Enabled recovery of bad sectors
09:31:02 Calculating checksum...
09:31:02 Uploading file to box...
09:31:02 box is flashing from its memory...
09:31:03 Log: +++ 015 bad sector recovery enabled
09:31:03 OK, flash-copy succeeded

Flashed #84

09:31:40 box type: DM800SE
09:31:54 Enabled recovery of bad sectors
09:32:12 Calculating checksum...
09:32:13 Uploading file to box...
09:32:31 box is flashing from its memory...
09:32:33 Log: +++ 015 bad sector recovery enabled
09:32:33 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!

tried to flash estar-dm800se-nemesis2.6.nfi after flashing both bootloaders in recover bad sector mode

is it possible to change the sim to an DM800se 2.10 i have a spare one.will it work with the hardware.
 
Reply
#8
0
Yes you can change the sim, but should be for your box not for another type Sim 800se for 800se box and sim800hd for 800hd box, And not the other way around...

But if you want to change the sim for another Team for example you want change sim e-star to Ferrari do this steps:
1-Don't change sim now leave it on box.
2-Flash new image for new sim (Ferrari image)
3-Turn off power
4-Now change sim.
5-Turn power on.
 
Reply
#9
0
cannot flash any other image to it except Estar_OpenBlackHole_ES800se_yassinov,what ever image i try i just keep getting Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!

so i wont even be able to flash an DM800se sim 2.10 image, it s impossible
 
Reply
#10
0
no not possible to flash another image team in your box...Try to contact e-star support better ...
 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)