07-12-2013, 09:43 AM
0
Hello to all
I have an INET500HD with ferrari sim . I tried several programs as dreamup for ferrari sim , optiflasher but my receiver is still "dead"
It works when i connect it with serial (mini usb to it's service port) but with dream up i'm waiting for acknowledge for hours...
With optiflasher i can connect via com port , but i tried all the possible operations (no ca found , write bootloader , write image). When i press the do job button i turn off my receiver , turn it on again , the optiflasher recognizes the receiver and the com port ,
My settings are
COM2 LD3 FOR FERRARI SIM (I TRIED ALSO LD1)
Connect only with rs232/usb mode
Press do job (repair ca or write bootloader)
Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM500HDSSL87F.nfi
FSize: 126784 bytes
But it stacks there. Nothing happens after it.
Finally i connected via terminal and here are the results
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=FFFFFFEC
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEC
RC4=0000000E
WC4=00000035
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000E
RW=00000014
WW=0000004A
G=00000000 R=0000000E W=00000010
BL=00000000
RC1=00000001
RC2=00000016
BL=00000001
RC1=00000003
RC2=00000018
BL=00000002
RC1=00000002
RC2=00000017
BL=00000003
RC1=00000005
RC2=00000018
BL=00000004
RC1=00000001
RC2=00000017
BL=00000005
RC1=00000005
RC2=0000001A
BL=00000006
RC1=00000001
RC2=00000018
BL=00000007
RC1=00000003
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HD
FIRST STAGE 1.2/400 {BI5I6E5xE3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #77 (20100517)
I have an INET500HD with ferrari sim . I tried several programs as dreamup for ferrari sim , optiflasher but my receiver is still "dead"
It works when i connect it with serial (mini usb to it's service port) but with dream up i'm waiting for acknowledge for hours...
With optiflasher i can connect via com port , but i tried all the possible operations (no ca found , write bootloader , write image). When i press the do job button i turn off my receiver , turn it on again , the optiflasher recognizes the receiver and the com port ,
My settings are
COM2 LD3 FOR FERRARI SIM (I TRIED ALSO LD1)
Connect only with rs232/usb mode
Press do job (repair ca or write bootloader)
Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM500HDSSL87F.nfi
FSize: 126784 bytes
But it stacks there. Nothing happens after it.
Finally i connected via terminal and here are the results
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=FFFFFFEC
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEC
RC4=0000000E
WC4=00000035
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000E
RW=00000014
WW=0000004A
G=00000000 R=0000000E W=00000010
BL=00000000
RC1=00000001
RC2=00000016
BL=00000001
RC1=00000003
RC2=00000018
BL=00000002
RC1=00000002
RC2=00000017
BL=00000003
RC1=00000005
RC2=00000018
BL=00000004
RC1=00000001
RC2=00000017
BL=00000005
RC1=00000005
RC2=0000001A
BL=00000006
RC1=00000001
RC2=00000018
BL=00000007
RC1=00000003
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HD
FIRST STAGE 1.2/400 {BI5I6E5xE3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #77 (20100517)