NO CA not working DM800 - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: NO CA not working DM800 (/showthread.php?tid=990) |
NO CA not working DM800 - birkalog - 07-29-2012 Hello, I have a little problem. I can not fix No ca anymore, I use Dreambox Optiflasher Pro V1.0.8 Enigma2 When i try to repair its giving me an IP that i not use in my lan (192.168.1.77) Its sending flash loader after that it says : second stage ok Boot success & ready for network Web Interface! and i get small window that says Enter IP shown on ***Stop MODE*** And its all the same ip 192.168.1.77 When i put in ip i get Error: Socket Error # 10054 Connection reset by peer. I have turned off everything and started everything again put same result. It is the same on every DM 800 HD i try Please help RE: NO CA not working - fairbird - 07-29-2012 Flash bootloader and also image by using "Fix Bad Sector "Sectors Recovery"" method by optiflasher.. RE: NO CA not working DM800 - fairbird - 08-06-2012 Closed...not followed thread |