InfoServ
DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND (/showthread.php?tid=977)



DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - teacman - 07-24-2012

bonsoir a tous
désolé, mais moi et l'anglais pas trop copain.
on viens de me donner une DM800 SIM2.01 qui est bloqué;
elle a été flashé avec une image officiel, donc pas le bon boot d'installé, et au redemarrage il a eu ce message.
DREAM MULTIMEDIA
->error!
* ERR01: NO CA FOUND.
impossible de se connecter avec le cable nul modem.
avec Dreamup impossible de se connecter,
avec le soft Optiflasher, impossible de se connecter avec le cable nul modem
avec hyper terminal rien a faire non plus.
cela peu provenir de quoi,
j'aurais bien voulu avoir un avis a ce sujet la
si il y a besoin de plus de renseignement, ne pas hesiter a me le noté

Teacman


Good evening has all.
Sorry, but me and English not too much friend.
We have just given me a DM800 SIM2.01 who is blocked
She got caught speeding with an image an official, thus not the boot installed, and in the restart it had this message.
DREAM MULTIMEDIA
->error!
* ERR01: NO CA FOUND.
Impossible to connect with the cable no modem.
With Dreamup impossible to connect,
With soft Optiflasher, impossible to connect with the cable no modem.
With hyper terminal nothing has to make either.
It little to result from what?
I would be kind enough to have an opinion has this subject
If he needs more piece of information there, not to hesitate has me the noted.
I changed the SIM card and it is the similar

Teacman


RE: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - fairbird - 07-25-2012

Please ..English only


RE: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - teacman - 07-25-2012

(07-25-2012, 04:43 PM)fairbird Wrote: You are not allowed to view links. Register or Login to view.Please ..English only

Good evening has all.
Sorry, but me and English not too much friend.
We have just given me a DM800 SIM2.01 who is blocked
She got caught speeding with an image an official, thus not the boot installed, and in the restart it had this message.
DREAM MULTIMEDIA
->error!
* ERR01: NO CA FOUND.
Impossible to connect with the cable no modem.
With Dreamup impossible to connect,
With soft Optiflasher, impossible to connect with the cable no modem.
With hyper terminal nothing has to make either.
It little to result from what?
I would be kind enough to have an opinion has this subject
If he needs more piece of information there, not to hesitate has me the noted.
I changed the SIM card and it is the similar

Teacman


RE: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - fairbird - 07-25-2012

As you mentioned you have changed sim and got same issue..
So the problem is from:
1-Box ( maybe motherboard defective or com connection) or (null modem Cable not work maybe defective).
2-Pc problem.
..............
So..try first to flash your box by another pc with another windows. and use optflasher "Null modem cable only without Network lan" method and flash bootloader for sim201 then flash any image..See here how to flash..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
If you not successful try another null modem cable.


RE: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - teacman - 07-25-2012

i think a motherboard, because my null modem it's ok with other DM500 or DM800 SE and dreamup or optiflasher. my port com in my PC it's ok
Would know you points has to verify, to check the port com on the motherboard.
Would have you plans or the other one to be able to make these controls.
Thank you for everything.

Teacman


RE: DM800 Sim2.01 " -> error! *ERR01: NO CA FOUND - fairbird - 07-25-2012

No way to fix your box with out null modem cable work..
Take your box to technical to check motherboard and connection port..