[SOLVED] DM800HD PVR Help - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [SOLVED] DM800HD PVR Help (/showthread.php?tid=715) |
DM800HD PVR Help - stigmata1823 - 05-18-2012 box wont boot just getting multimedia error and red power light is blinkin, no idea what image or bootloader was on before and tried numerous sites to try sort this, i have opened the box and its a pure white sim in it with not one bit of writing on it so no idea what sim is in it either, i have been at this 3 days now and no further forward so here i hope yassinov can help me out RE: DM800HD PVR Help - fairbird - 05-18-2012 That section just for Images...so i moved topic here. And about your problem most probable your sim is sim one. So try to flash bootlogo69 in attach download, extract and flash it on your box by optiflasher here and use "Flashing by Null modem cable only without Network lan" here how to If you success it is ok. if you not try to flash this image.. RE: DM800HD PVR Help - stigmata1823 - 05-18-2012 no image in last link mate RE: DM800HD PVR Help - fairbird - 05-18-2012 Sorry, Link fixed RE: DM800HD PVR Help - stigmata1823 - 05-18-2012 thanks mate will give it a try, i remember earlier today i have an image on it and was working then tried another image and its stopped, image that was on it was a grey/black image and boot logo was a sim if that helps any with my box?? RE: DM800HD PVR Help - fairbird - 05-19-2012 No that can not help, just do it what i mentioned and lest us your result.. We are here to help. RE: DM800HD PVR Help - stigmata1823 - 05-19-2012 seems like the damn holder that the sim card sits in is broken so the sim aint sitting properly so i thought id hold the sim in place while i powered the box up and its booting!! where do i get a new one of these? RE: DM800HD PVR Help - fairbird - 05-19-2012 So sim holder is broken, Like this motherboard not connecting with sim. You need new one. See your PM. RE: DM800HD PVR Help - kwabh - 05-21-2012 On an ordinary DM 8090 HD PRO clone,SSl 84B,sim 2.10, Can I use safely Optiflasher PRO-E2 for inserting any new image ramiMaher and equally for TS panel 5.4? Should I use Only LAN cable (without NULL modem cable or Rs 232) RE: DM800HD PVR Help - fairbird - 05-21-2012 please for any questions make new separate Topic, and put full details about your box. Thank you |