+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: please help me to remove this error (/showthread.php?tid=524)
please help me to remove this error - morteza - 04-22-2012
Hi all
Here I have a big problem with dreambox 800 hd clone that is stuck on ERROR I
Dreambox 800 hd clone sim 2.01
I try with several versions of Dreamup Dreamup patched and nothing to do with Dreamup ago patched the facade message serial setup 192.168.1.77or 192.168.1.56
Even with software v2.5 NCF SIM2 same problem
I try with the internet address with the information I see
information
when i try with different version of dreamup i get the ip in lcd i type it in
web browser i can see the device info, from boot BUILD # 59, built 20080509 and when i use dream up 1.3.3.9 i get BUILD # 84, built and i send the image to the end,when i reboot the unite i get the error again
RE: please help me to remove this error - fairbird - 04-22-2012
Ok..
First download two bootloader files from attachment..use one by one after use any one turn off your box and turn on.
And use optiflasher from here
use null modem cable only without netwrok, here how to use
Try and let we know...
RE: please help me to remove this error - morteza - 04-22-2012
HI
when i press on write bootloder/update it dosent let me to choose the 2 boot that u have sent me,it just stars flashing
OH,ok i did it and this is what i get after the second ssl loder
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-84a.nfi
FSize: 174832 bytes
Authorization id: D6D56942
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !
but when i unplug an plug it i get error!
RE: please help me to remove this error - fairbird - 04-22-2012
ok...What error exactly you got? please full details
RE: please help me to remove this error - morteza - 04-23-2012
Ok,i did as u said,run optiflasher,first i sent the loader 76r to the box as it was described,un plugged the DM and again sent the loader 84a to the box
at the end i got this
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-84a.nfi
FSize: 174832 bytes
Authorization id: D6D56942
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !
i unplugged the DM pluged it back again in the lcd iget dream multimedia error.
it looks like what erver i send to the DM it makes no different.
i have original sim card from my old DM800 shall i remove the sim 2.01 and flash it with that?
if i do that what loader and image should i send to box
thanks
RE: please help me to remove this error - morteza - 04-23-2012
well i put the original sim in the box,i started the dreamup 1.3.3.9 connect without cable lan, i got uploading the green line goes to the end, but the grey flash button dosent go on,i used the force software it goes on, i cant flash any image because it says calculating ckeck and and do nothing,but i get the ip address in lcd, i type the address in web browser and this is what i see in device info
??? second stage loader #84 (2011-09-02)
i flashed it with dreamboxuk image 2.1.2 for original box ssl #84
with web browser it flashed all the way to the end.
after i reboot the box comes on with error in lcd
dont know what to do any more
RE: please help me to remove this error - fairbird - 04-23-2012
Mate ..please focused on one thing only..you want to use original sim on clone box or you want to fix sim201?
RE: please help me to remove this error - morteza - 04-23-2012
which ever get fix,this is important
until now no luck at all
RE: please help me to remove this error - fairbird - 04-23-2012
First must be fix your sim then i will give you how to use original sim on clone..
I have mentioned to use one bootloader and if not success after unpluge and pluge DM try to use the another one..
Try this step and if it does not succeed. Try to flash only this image without bootloader
And let we know your result.
RE: please help me to remove this error - morteza - 04-23-2012
ok, using boot 76-r1 the result
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage_76-r1.nfi
FSize: 212320 bytes
Authorization id: A67E27C6
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !
no luck after reboot error
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: secondstage-84a.nfi
FSize: 174832 bytes
Authorization id: D6D56942
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !
no luck after reboot, error
will try the third part