[Request] no ca or image 2nd failed SUNRAY SR4 (dm800se clone) HELP plz - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [Request] no ca or image 2nd failed SUNRAY SR4 (dm800se clone) HELP plz (/showthread.php?tid=4180) |
no ca or image 2nd failed SUNRAY SR4 (dm800se clone) HELP plz - sunhouse2 - 06-12-2016 hi, i've SUNRAY SR4 SIM 2.10 (dreambox 800SE clone) single tuner, i've "NO CA IMAGE 2nd failed" error when i do MINI FLASHUP and some seconds after it shows IP receiver when i do nothing, receiver starts normally but when i try to scan channels , receiver reboot : i want fix reboot problem when i scan channels. i tried optiflasher with tutorial with "REPAIR NO CA FOUND" and "RESET BIOS FACTORY" with RS232 cable only and RS232 cable and ethernet in this forum step by step , but can't fix this problem , i loaded the 84B and 84D bootloader no luck ! i tried too sunray flashup repair bad sectors same problem!! reboot when i try to scan channels and when i do MINI FLASHUP receiver show 'no ca image 2nd failed' and some seconds after it shows receiver IP RE: no ca or image 2nd failed SUNRAY SR4 (dm800se clone) HELP plz - luigi86 - 08-23-2017 I have this problem with the receiver some way to solve it ? |