[SOLVED] Cloned DM800HD PVR sim 2.01 - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [SOLVED] Cloned DM800HD PVR sim 2.01 (/showthread.php?tid=412) |
Cloned DM800HD PVR sim 2.01 - kaack - 02-14-2012 I seriously need help now. Have cloned DM800HD PVR, with sim 2.01. Running Enigma2 5.10. I bought my box on the internet and it came fully functional. It had bootloader #76 installed. I wanted to update the box, because I had some problems finding new channels and the box was overheating. I got some different images, including an image flashed and working on a friends box similar to mine. All my trouble started when I tried to webflash my box with the new bootloader #84a. After this I got Error! Erro1 NO CA Found. When I use dreamup via com1 port, just before it gets it’s ip address I can se In the box display it says boot # 84. When I check the webbrowser it says “ The ??? dreambox bootloader #84” I tried to flash, via web to get It back to bootloader # 76 but I cant. Every time I flash the backup image, or any other images, I get the same error upon reboot. I also tried another program, optiflasher pro E2 v. 1.0.8 by Yassin. I did the flash by cable, it took about 1½ hour and it said flash successfully at the end and after reboot I get this error. Dream multimedia -> Error! So now I don’t get the Error! Erro1 NO CA Found. But just Error! When the programs gets an ip to the box, and when I check the browser, I found that when I use the dreaup it’s always bootloader 84 and when I used optiflasher it says bootloader # 59 After the last 14 days of searching the internet and flashing all kinds of different images trying all methods out there I need your help. What am I doing wrong? Now I cant even get bootloader # 76 or #72 to work. Also tried # 82. Is the problem in the sim card, I mean does it not support bootloader 84? Why cant I get bootloader #76 to work, and what about my backup image created from the box, when it worked. I made 2 different backup images, one from GP2 flashbackup and one from optiflasher. RE: Cloned DM800HD PVR sim 2.01 - kaack - 02-14-2012 (02-14-2012, 01:01 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Hi I cant get anything to work at the moment. Not even my backup works. Usually when i put power on box while holding the on/off button in front i reach a ***STOP***. But now it goes directly to error message. Could it be a wrong bootloader? RE: Cloned DM800HD PVR sim 2.01 - kaack - 02-14-2012 (02-14-2012, 03:05 PM)YASSINOV Wrote: |