InfoServ
[SOLVED] Dreambox 800 hd clone sim 2.0.1 ( error ) - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] Dreambox 800 hd clone sim 2.0.1 ( error ) (/showthread.php?tid=397)

Pages: 1 2


Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-03-2012

Salut a tous
Voila j’ai un grand problème avec dreambox 800 hd clone qui est bloqué sur ERROR j’était entrain de regardez un film
Dreambox 800 hd clone
boot ssl84a
image BlackHole-1-6-3-dm800hd-ramiMAHER
sim 2.0.1
J’essayez avec plusieurs versions de dreamUP et dreamUP patched rien a faire avec dreamUP patched il y a message a la facade 192.168.1.77 # # serial setup # # #
remarqué aussi les leds du réseau sur le dos sont toujours allumés, lorsque l'alimentation est sur la db, même si aucune rj45 insérée dans la prise.
Même avec le logiciel NCF SIM2 v2.1 même problème
j’ai essayez avec cette adresse avec Internet je voie ces information
Information
Product Name ???
Booloader version Dreambox Second Stage Loader BUILD #59, built 20080509
Flash Size 64 MB
Production Date (YYYY/MM/DD) N/A
mID ?
Serial Number ?
MAC Address ?
Printed Serial Number ?

Besoin d’aide
merci d'avance a tous
a+


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-03-2012

salam mon ami
j"ai suivez la méthode mais a la fin du transfère du
-Repair [NO CA FOUND] & selection "DM800-sim2.01-ss84a"
-Do Job
il y a un message invalid filename ce message c'est normale ou non
merci
a+
salam mon ami
j"ai suivez la méthode mais a la fin du transfère du
-Repair [NO CA FOUND] & selection "DM800-sim2.01-ss84a"
-Do Job
il y a un message invalid filename ce message c'est normale ou non
merci
a+


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-03-2012

salam
c'est ok pour ce problème de fichier invalide
quand il arrive a ça
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 1D00280B
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
ici je fait quoi
merci


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-04-2012

salut mon ami
comment faire cette configuration mon ami pour ip de la dream quand je click sur connect impossible
merci de me donnez des explications
je travail avec micro portable hp 6830s et sur wifi
a+


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-04-2012

salut mon ami
j'ai fait comme tu ma dit et je suis bloqué ici
NB: il y a que ssl84 qui passe avec succès sur Repair (NO CA FOUND)
et l'mage avec boot ssl84 les autres échec

1er phase Repair (NO CA FOUND) ssl84
Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Connected !
FSize: 174832 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
DreamBox Flashed Successfully !

ici comment faire je débranche la prise après avoir coché write image /restore backup

2eme phase ici après que j"ai débranché la prise et j'ai rebranché l'image et passé avec succès
Name: openblackhole-updat-dm800-Sim2.#84riyad66.nfi
FSize: 46907056 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
DreamBox Flashed Successfully !
HTTP/1.0 404 Not Found
Rebooting...
HTTP/1.0 404 Not Found
je ne peut pas rebouté avec le logiciel il faut que je débranche et je rebranche a chaque manipulation c'est normale ou non
même problème a la fin error
merci de m'aidez



RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - hakim2004 - 02-04-2012

merci mon ami pour ton aide et ta patience
depuis 6jours 24h/24 que je travail pour réglé ce problème mais sans résultat comme ma femme ma dit jette le a la poubelle je vais suivre ces conseils et je reste tranquille je suis fatigué
merci encore 1000f mon ami YASSINOV
a+


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - luiscarlosalves - 02-10-2012

estou com dreambox ncf repair tool sim2/01 edition by YASSINOV
nao sai do power on db device [esc to abort] e na dreambox 800hd fica no visor
DREAM MULTIMEDIA ERROR 1 NO CA FOUND
caro amigo yassinov estou aqui com uma dreambox 800hd bootloader 82 card sim 2.01 coloquei uma image clone dream link ss 75 e ela fez o boot normal ao reiniciar ela travou [no ca found] agora ta com as luzes da conexao rj45 acessas direto e nao sai disso [no ca found] tou usando o cabo serial rs 232 com a porta com1 com varios dreamups 18 tipos diferente um do outro ja usei todos normalmente e com repair e o enforcer mais ela nao arranca e vai direto para o [no ca found] estou tentando agora com o dreambox ncf repair tool sim 2/01 edition by yassinov ainda continua indo direto para [no ca found] nao encontra o [CA] tem alguma coisa que eu possa fazer ou verificar o que poderia ser entendo muito pouco de dm 500s.
o que poderia ser que nao esta deixando minha dreambox 800hd arrancar para fazer o repair [no ca found] para fazer minha dreambox 800hd voltar a viver novamente existe alguma coisa que voce poderia me auxiliar amigo te agradeço a voce e a todos desse forum o meu muito obrigado


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - morteza - 04-22-2012

(02-04-2012, 03:16 PM)hakim2004 Wrote: You are not allowed to view links. Register or Login to view.merci mon ami pour ton aide et ta patience
depuis 6jours 24h/24 que je travail pour réglé ce problème mais sans résultat comme ma femme ma dit jette le a la poubelle je vais suivre ces conseils et je reste tranquille je suis fatigué
merci encore 1000f mon ami YASSINOV
a+

Hj
i have the same problem could u tell how did u get it fix, i have been working on it for past 3 days but no luck

thanks


RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - fairbird - 04-22-2012

(04-22-2012, 04:59 AM)morteza Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]




RE: Dreambox 800 hd clone sim 2.0.1 ( error ) - kwabh - 04-29-2012

GREETINGS.
Hi Yass-Hope you are FINE.
Apologies for this long message,it will bore you.
In february I sent my Dm 800 PRO HD to the Shenzhen Factory as a problem of RED light on OLED screen manifested.It was still under
warranty, which will expire end of may12. In Shenzhen they found out that the faulty part is the SimCard on board. They replaced it by a Sim2.10 and loaded the following image :-Enigma 2 2011.o9.28)-3.2 , Nemesis 2.4 image(SVN 098 r6 of o3.11.2011). I got it back on jummah last. I explored that image and found out that it contains all North Pole Pointed transponders of various satellites 14*W to 100*E.
AS my location is 20.23*South of ther equator and 57.45*East,only
these satellites with South Africa pointed transponders arerecievable-
16.0*E and 36.0*E,
Have 2 choices, Have to delete all the un-usable satellites + channels
or to FLASH a newly release image V 109 Nemesis 2.6.
How to delete unused satellites + channels on that image.

Thanks for your constant generosity and assistance.
BEST WISHES.