+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: 800HD PVR Wont start at all after flashing failure (/showthread.php?tid=3228)
Pages:
1
2
800HD PVR Wont start at all after flashing failure - Nudel - 12-04-2014
Hi.
I recently bought a 800HD PVR.
I could connect to it via FTP.
But I wanted to upgrade it.
So I searched for a few hours and found a recommended bootloader
I flashed it via HTTP with no problems.
But when I started it up later, I had the NO CA error.
Well, no problems there. But i learned that I had bought a clone...
I then searched some more and found that this setup would work;
sim201_ssl84a
OpenPli-3.0-hdglass16-8.55-DM800-SIM2-SSL84D-26.10.2014-Houara
So I connected the box with both the rs232 and LAN cable.
No problems there eather.
Box connected. Said it was a DM800 down the corner in Dreamup.
I then flashed the bootloader.
And I also flashed the PLI image through Dreamup.
But after 99% of installation I got a error message.
"Error - box will be useless now"
Didnt thought much more of that. But I discoennected the box.
And now it is impossible to connect to it.
I have tried every single program to connect to it, but nothing.
When i put in the power cable the ethernet connector lights up.
But it is impossible to start it.
I have disconnected the tuner.
I have removed the SIM.
How do I fix this box?
SIM 2.01
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-04-2014
I think I have tried it all now.
Nothing seems to work.
The box doesn't start.
So not any program can connect to it..
How the hell do i solve this?
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-04-2014
Read these SOLVED topics..
and this topic
P.s: Must be you have Rs232 cable to fix No Ca Found you can not fix it with lan cable
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-04-2014
I dont know if you read any of what i wrote in my first post?
i have the null cable.
I dont have the NO CA error.
My problem is that the box is completely dead and I cant connect to it.
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-05-2014
Already I have read your replays before I posted my reply ...
Does front panel of box work or black?
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-05-2014
Its totally black.
The screen just flicker för 1sek.
Then completely black.
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-05-2014
Then in this case you have hardware issue..Take to technical ...maybe need to change some capacitors ...
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-05-2014
All capacitors looks good.
I actually got i started right now.
I managed to get ssl 84A installed.
But after that it had to reeboot.
And now it is the same.
The screen is pitch black. And i can not connect to it.
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-05-2014
Did you tried other power supply adapter ?
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-06-2014
Not yet. But I have ordered one just to try .