[SOLVED] DM800 SE clone, no ca found (E-star Sim) - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [SOLVED] DM800 SE clone, no ca found (E-star Sim) (/showthread.php?tid=2993) |
DM800 SE clone, no ca found (E-star Sim) - erniebe - 09-14-2014 I have; -DM800se -Clone -SIM2.01-ssl84b -No Ca Found After Flash image I am working with Optiflaher Pro v 2009; This is how I do the job; advanced > settings > V smart check NFI + use RS232/USB mode only Enigma2 > repair [no ca found] do job This is how the progam ends; i tried waiting for 1 minute til 1 hour but gives always the same result. When I reboot the box, he says "no ca found" What do I wrong or is there a other solution? Regards RE: DM800 SE clone, no ca found - erniebe - 09-14-2014 Sorry, for the mistake. I have more info of the box; I hope the info is better now RE: DM800 SE clone, no ca found - erniebe - 09-14-2014 Hi, Problem is solved, I found out by opening the box it was a e-star sim sll84. Box is working now thanks to the Optiflasher Pro v 2009. RE: DM800 SE clone, no ca found (E-star Sim) - fairbird - 09-15-2014 Solved ... |