InfoServ
[Request] DM800 -Ferrari Sim,.Error NO CA FOUND - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [Request] DM800 -Ferrari Sim,.Error NO CA FOUND (/showthread.php?tid=2903)

Pages: 1 2

RE: Sim201 team #84B,.Error NO CA FOUND - bjorntg - 08-31-2014

Hi OptiFlasher Pro Ultimate working again now but the NAND Ferrari Images is not bound to the Program..That was the last step on serial-LAN.I am proud to have come so far. I have a NFI download center file but i don't know where to replace it.
Regards bjorntg

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - fairbird - 08-31-2014

Before continue ...
Did you follow my steps in my previous replay? and did you choose No Ca found > sim ferrari > SSl88F?
and if yes did you turned off box then tuned on? And your box does it upgrade bootloader to SSl88F?

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - bjorntg - 09-01-2014

Hi I am not competent to draw any conclusions
1) Welcome To OptiFlasher Pro Ultimate Enigma2 EDition! Join Our Forum/Support at : [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] SSL-BT Check Ok! NFI-DC Module Check Ok!

2a) Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 7BEDCBF5
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !

2b) In Display error

3) Write Booloader:Sending bootloader

Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM800-SSL88F.nfi
FSize: 141568 bytes
Authorization id: 7BEDCBF5
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !

3b)In Display IP 192.168.1.77
Serial mode

4) Write IMAGE -Get my image]- did not work .Image BlackHole taken from Desktop .the same was DM800-SSL88F( I did place them there because "Get my Image" did not work)


Power ON DB Device [ESC to Abort]
DM800HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: BlackHole-2.1.1_Ferrari-SSL88F_dm800_20140725_RAED.nfi
=================External-Detection-Info=================
NFI: OE1.6-2.6 Detected!
DM800HD Detected!
Smart Check: ferrari-ssl88F Detected!
Authorization id: CC5C6D40
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...
Dreambox Flashed Successfully !

In Display IP 192.168.1.77
Serial mode


5) Serial+LAN

Writte Image

Power ON DB Device [ESC to Abort]
DM800HD Detected !Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
No NAND Ferrari images found
Error: Socket Error # 11004

Connected !
Size: 138,25 KB
Please Wait ! Do not Disconnect Until Done/Reboot !
OptiFlasher Error: Socket Error # 11004

"Access violation at address 006DE4C9 in module DB Pro-Ultimate
Read of address 00000000"

Regards bjorntg

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - fairbird - 09-01-2014

Do this setups:
1-Make your box on (Stop mode)
2-open browser
3-put the box ip that shown on small screen panel in browser
4-Hit enter from keyboard
5-Flash Openpli3.0 image

And then give me your result

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - bjorntg - 09-04-2014

Hello, I find no indication what ssl.nfi number that is corresponding to ssl88f and to be used for dm800 Ferrari sim. Possibly the reason why I still can`t access the Nand images for Ferrari sim.I had in mind that a donation-key for the NFI-DC can solve the problem
Best regards bjorntg

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - bjorntg - 09-04-2014

Hi I did follow your advice at the end and result
Socket Error # 10060
Connection timed out.
ca repaired but there must be other problems in the box
J.TAG ?
Best regards bjorntg

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - fairbird - 09-05-2014

Mate...I told you to flash image by web browser not by optiflasher (we want to test your box)
here you can download my patched image for DM800 ferrari
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Download image and flash it by browser only then give me your result..

RE: DM800 -Ferrari Sim,.Error NO CA FOUND - bjorntg - 09-06-2014

Hi Yes, I did it with web browser with sim 201 earlier but could not flash image.
Now with Ferrari sim and web browser the same result .

Copy of the results:

""This is the ??? bootloader Web Interface.
If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...

You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is ?, and was built on N/A.

Booloader version: Dreambox Second Stage Loader BUILD #65, built 20080927

Firmware Upgrade

Select .nfi-File:
OpenPLI-3.0-beta_Ferrari-SSL88F_DM800_20140806_RAED.nfi
Note: Depending on your browser, the file upload can take several minutes. The recommended browser to use is Mozilla / Firefox, but Opera 6.xx+ and IE5+ work as well.""

I can not fix hardware The only thing had to be replace to Alps REV M BSBE2-801A Replacement Tuner for DM800HD...

Best ragards and many thanks for your patience