[Request] DM800 HD PVR clone sim 2.01 NCF repair fails - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [Request] DM800 HD PVR clone sim 2.01 NCF repair fails (/showthread.php?tid=2402) |
DM800 HD PVR clone sim 2.01 NCF repair fails - delta77 - 01-20-2014 Hi, It would be really nice if you could help me with this: my pli image was unstable and then I accidentally flashed my clone dm800 with latest original image, then I see the following: Deam Multimedia -->error! look at *ERR01: NO CA FOUND Also both yellow and green lights of Ethernet are on even though nothing is connected to it. prior to all of this I had flashed sim201 team84b last year without any problem. now the problem is when I use NCF repair tool V3 or Optiflash, it says DM800HD detected, but then "sending flash loader..." doesn't progress. I tried so many times and no luck. I am using RS cable and port com2, just the same way it had worked last year. I am very disappointed now, and obviously I am not an expert, so please help me with this!!! RE: DM800 HD PVR clone sim 2.01 NCF repair fails - fairbird - 01-21-2014 here you can find all images for your sim And read those topic to fix your box... and P.s:Must be you have Rs232 cable to fix your box not Lan cable RE: DM800 HD PVR clone sim 2.01 NCF repair fails - delta77 - 01-21-2014 thanks a lot fairbird... I tried everything but I couldn't fix... but I used another PC with windows 7 and rs323 to usb cable with some patched dreamup and it somehow worked. then I flashed blackhole image, and all appeared fine, but the light on the box front panel is dim and fading, and the box gets really hot too, I wonder could this be a power issue or is it some kind of hardware/software issue? RE: DM800 HD PVR clone sim 2.01 NCF repair fails - fairbird - 01-21-2014 If box come very hot then hardware problem need technician...If you fix no ca found and box work again then should be close this topic under solved ... |