[SOLVED] DM500HD clone ferrari sim - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35) +--- Thread: [SOLVED] DM500HD clone ferrari sim (/showthread.php?tid=2325) |
DM500HD clone ferrari sim - mbjoca - 12-22-2013 Hello, My DM500HD clone ferrari stoped working after a wrong image flash. Then with OptiFlasher I did a new image flash with sucess, but it still not working. I have this message on the TV: "Hardware could not be verified. Please contact Dream Multimedia Sipport. Code 0x1800f" Could someone help please? I'm sending attached the picture of Optiflasher with connection details. Thanks RE: DM500HD clone ferrari sim - fairbird - 12-22-2013 Open box remove sim clean it replace it again...Then flash you box by this tutorial (With fix bad sectors) P.s:Must be both cables work to gather (mini usb+lan) RE: DM500HD clone ferrari sim - mbjoca - 12-22-2013 (12-22-2013, 09:43 PM)fairbird Wrote: Thanks fairbird, 1 - I removed the sim, cleaned it and replaced it again. 2 - I tried to follow the tutorial, but was not possible, because I can't put the box on STOP mode. The box still not working! Any suggestions? RE: DM500HD clone ferrari sim - fairbird - 12-23-2013 Did you by optiflasher to flash new image by this method (1-Null modem cable only without Network lan.) Also Must be both cables work to gather (mini usb+lan), but select Advanced2 If doesn't succeed then Put your issue in ferrari forum support in correct section (Johnny-burrp) Technical guy he will help you if issue is Hardware.... RE: DM500HD clone ferrari sim - mbjoca - 01-17-2014 (12-23-2013, 01:11 AM)fairbird Wrote: Thanks fairbird Now the box is working fine! I solved the problem with FerrariFiller. RE: DM500HD clone ferrari sim - fairbird - 01-17-2014 Closed Under Solved |