DM800se dead? - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35) +--- Thread: DM800se dead? (/showthread.php?tid=2217) |
DM800se dead? - brate - 11-26-2013 Hello @ all I have for the first time now absolutely no idea what i can do anymore I have a DM800se with SIM210 Sadly i "flashed" NN2 image with the latest DreamUP 1.3.3.11 and at the point flashing from its memory it wont go anymore further so i disconnected and shut down the box and this is where the problem starts now i can't flash anything anymore SunrayFlashUP is connecting but stops at "upload completed waiting for acknowdledge" i cant flash any SSL or Image cause the flash image button is not showing up Optiflasher i tried both baudrates and the flasher is Sending also flash loader but then nothing happens anymore i also tried recover bad sectors but i guess i am not comming that far i just want to 100% if this box is dead so i can forget it thx in advance this is the complete bootlog Code: BCM74130011 RE: DM800se dead? - brate - 11-26-2013 (11-26-2013, 01:20 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.If your box is out of warranty then please confirm first that your sim is 2.10 Yes no warranty anymore sadly i am 100% sure it's 2.10 the box is completly opened i removed the tuner and HDD to try flash but it does not help i cleaned the SIM and the pins with Isoproply i tried your advise but it ends with the same result Sending flash loader...until 100% ( it goes fast) then nothing happens RE: DM800se dead? - brate - 11-26-2013 (11-26-2013, 01:34 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.DreamUp V1.3.3.11 have no patched version for clone so from the begin exactly my dm worked fine on NN2 3.3.2 but i wanted to update i took original dreamup flashed NN2 4.0.5 lean by rami maher and now box wont boot at all i think my box is seriously broken -.- maybe first bootloader is broken if thats possible RE: DM800se dead? - blowagie - 12-17-2013 Hi, I do have exact the same problem. Did you manage to resolve this problem? I can't flash a second time, I then get wrong boot response. If I wait more yhan 15 minute, I can flash with the same result: Sending flash loader ..... I already tried another sim2.10, same problem. Tx Bart Log after second time power on (via putty com4): BCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000001% RC1=00000004 WC1=00000010 RC2=00000017 WC2=00000034 RC3=0000000D WC3=FFFFFFE2 RC4=0000000D WC4=00000035 NWC=0000000B RC5=00000005 WC5=0000000B RC6=00000017 WC6=0000000B NRC=0000000E RW=00000013 WW=00000054 G=00000000 R=0000000E W=0000000B BL=00000000 RC1=00000003 RC2=00000014 BL=00000001 RC1=00000004 RC2=00000014 BL=00000002 RC1=00000004 RC2=00000013 BL=00000003 RC1=00000005 RC2=00000014 BL=00000004 RC1=00000005 RC2=00000014 BL=00000005 RC1=00000005 RC2=00000016 BL=00000006 RC1=00000004 RC2=00000014 BL=00000007 RC1=00000006 RC2=00000016 3 COPY CODE COMPARE CODE |