[SOLVED] Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [SOLVED] Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV (/showthread.php?tid=215) |
Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV - dodo - 12-16-2011 I Have Klon sim 2.01 dreambox HD Pwr ssl84a 320gb 2.5 inc samsung hdd at barry allen Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV 'Power on DB Device (ESC to Abort) Operation Start at : 16:50:37 DM800HD Detected ! Wrong Boot Response' DreamUp universal v2009 files patched by repair with fornix natas and I connect with the enforcer but 20:40:29 box type: DM800 20:40:38 Calculating checksum ... from waiting for the OK box to begin uploading ... Unfortunately, he remains Help please (12-16-2011, 04:03 PM)dodo Wrote: You are not allowed to view links. Register or Login to view.I Have Klon sim 2.01 dreambox HD Pwr ssl84a Ncf sim2 V2 Acces violation at adress 00526476 in module 'NCF SIM2 v2 exe'. Reload of adress 0ABE66FC. OK Waiting for reply Yassınov RE: Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV - dodo - 12-16-2011 (12-16-2011, 05:22 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.(12-16-2011, 04:03 PM)dodo Wrote: You are not allowed to view links. Register or Login to view.I Have Klon sim 2.01 dreambox HD Pwr ssl84a Remove and re-put the sim card did not change, but the problem continues DM800 LCD screen, off the sim card just says Error Ream Multimedia, etc. When inserting the com dm7020 look at the number found in ca. When inserting the SIM card; NCF Dreambox Repair Tool SIM2 Edition v2.0 By YASSINOV 'Power On, DB Device (ESC to Abort) Operation Start at: 16:50:37 DM800HD Detected! Boot Wrong Response WRITES Why Boot Wrong Response write on lcd screen dream up 1 3 3 4 with the uploader of the 'waiting box begin to upload from the OK from' writing, but the installation does not start RE: Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV - berth - 12-16-2011 Hi All, after one week hard working for wake up my dead 2 day´s old DM 800 se HD, I found this site, and 5 min. later I have a working box. I tryed dreamup with enforcer, but still keep up: ca not found, and later: file to big. But with the NCF, it stop in the middel of the progres and write job not finish, but no worry, on the box was ****stop and IP adress, and then I could flash on the browser with the IP adress, and download inf. file. So therefore a big hand and a lot of thanks to master yassinov, you make my day. berth RE: Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV - shpendi_22 - 12-19-2011 Hallo Yassinov please help me i have a problem since yesterday with my dreambox 800 clone. i like to change my image and now ERR: No Ca Found Can You help me ? Thank you |