+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35)
+--- Thread: dreambox 800 genuine help (/showthread.php?tid=1965)
dreambox 800 genuine help - giannissk - 09-03-2013
hi yassinov.i have a dreambox800 genuine and uses pli image 1.6.
I wanted to I upgrade to tsimage_30_oe-2.0-dm800-20130406.nfi
i use lan update first,and after dreamup and We take the following message.
6:00:53 μμ box type: DM800
6:02:40 μμ Calculating checksum...
6:02:45 μμ Uploading file to box...
7:09:00 μμ box is flashing from its memory...
7:10:06 μμ Flashing failed (!!! 005 too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)), box will be unusable now!!
What am I doing wrong
thanks for your time
RE: dreambox 800 genuine help - fairbird - 09-03-2013
1-Download from this link last bootloader (SecondStage) for your sim SSl84
2-Flash bootloader to box
3-close box
4-Flash any new image you want
;)
RE: dreambox 800 genuine help - giannissk - 09-03-2013
(09-03-2013, 05:42 PM)fairbird Wrote:
2-Flash bootloader to box
3-close box
4-Flash any new image you want
;)
Thank you very Mach.its working with old image and now I try the new.
Thanks again
unfortunately raped., when loading the new image after 35% goes to 80% and at the end you keep getting the following error :too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)
reload the sekonstage but unfortunately I had done wrong before. no boot.
RE: dreambox 800 genuine help - fairbird - 09-03-2013
Flash new image by using recovered bad sectors ...
1-If you have pro key for optiflasher follow this link (Fix Bad Sector "Sectors Recovery")
2-If you don't have pro key read this topic..