InfoServ
[SOLVED] 'R01: NO CA FOUND' with A8P sim - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] 'R01: NO CA FOUND' with A8P sim (/showthread.php?tid=1731)



'R01: NO CA FOUND' with A8P sim - buffalo0207 - 05-28-2013

-DM800HD SE - with mini flash button
-Clone (i think - only paid £185 for it)
-A8P Sim
-R01: NO CA FOUND

Optiflasher Pro v.2.0.0.5 - Registered/Licenced

Windows 7 Ultimate 64 bit

Connected with USB (from computer) to mini usb (back of Dreambox) and via Lan through switch/hub


I'm having a big problem getting my 800SE with an A8P sim working. I followed NEPZSMILER's thread as it seemed I had the same problem.

Before the error, everything was working with OpenPLi 2.1 until I flashed Dream-Elite-dm800se-4-0-v001r003-ramiMAHER and got the error 'R01: NO CA FOUND'. I've followed your tutorial to the letter but get the following error message:

Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
I/O error 6
EInOutError

...then the front of my 800SE shows the 'SIM 2&4' boot logo with '*** SERIAL SETUP' mode and ip: 192.168.1.77, even though i am using an A8P sim.

If i then open a browser page (i've tried both IE10 and Firefox) and enter 'http://192.168.1.77', the Bootloader Web Interface page opens. However, when i try to flash the boot loader 'secondstage-dm800-84.nfi' nothing happens. In fact, whatever setting i use on Optiflasher, i get the SIM 2&4 boot logo with the ip page and still nothing will flash. I've tried with the LAN connected and then not connected. Nothing will work.

I've even tried taking out the A8P sim too, as in NEPZSMILER's post, but this also doesn't work. Am i right in thinking that i take the sim out and put it straight back in without turning the 800SE on?

Anyway, any help will be much appreciated...


RE: 'R01: NO CA FOUND' with A8P sim - fairbird - 05-28-2013

This Ip (192.168.1.77) Is optiflasher stander ip...
Follow this link...and try to connect box with pc by mini usb flash direct and also connect with lan cable..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
choose LD2 (for Genuine sim and A8P Sim)


RE: 'R01: NO CA FOUND' with A8P sim - buffalo0207 - 05-29-2013

(05-28-2013, 11:14 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
choose LD2 (for Genuine sim and A8P Sim)

I ended up using DreamUP 1.3.3.9 and have full control back - appreciate your help though...


RE: 'R01: NO CA FOUND' with A8P sim - fairbird - 05-29-2013

Closed Under Solved