InfoServ
Dreambox NO CA FOUND Repair Tool SIM2 v3.0 EDition +Updates - Printable Version

+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Dreambox NO CA FOUND Repair Tool SIM2 v3.0 EDition +Updates (/showthread.php?tid=162)

Pages: 1 2 3


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - davbills - 10-06-2011

Bonsoir,

Juste une question ??

J'ai une ERR01 NO CA FOUND depuis plus de 2 mois sur ma DREAMBOX 800.

Je n'arrive pas a m'en sortir.

Je viens de tester ce soft et la réponse est celle ci :

Opération started

Wrong boot response!

Avez vous une idée.

Merci d'avance


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - davbills - 10-06-2011

Re,

J'ai deja fait plusieurs fois cette manipulation, j'ai même racheté une autre sim card .

Vous n'avez pas une autre idée ??


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - khaz - 10-07-2011

الف شكر جاري التجميل والتجربه
هل ممكن لو سمحت تشرح لنا بالعربي اهمية البرنامج وطريقة استخدامه بالتفيل لكي نستطيع التعامل معه ولك منا كل الشكر


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - pratico - 10-07-2011

Merci ,
il est valable pour DM800 pvr originale?


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - pratico - 10-07-2011

J`ai fait la betise d`etuliser Dreambox NO CA FOUND Repair Tool avant de lire ta reponse j`ai recu le mesage error.
je suis oblige de flasher avec dreamup c`est parti pour 1h30.
si tu veux bien me dire la procedure avec optiflasher avec rs232 et rg45(cable croise ou non)?
merci d`avance


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - pratico - 10-08-2011

Merci yassinov,
jai suivi la procedure ,ca marche rapidement pour write image/restot backup, mais pour repair (ca no found) ca pas l`aair de marcher.


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - minette - 10-12-2011

Bonjour a tous,
je suis nouveau dans ce forum,et plutot neophite,
cela dit,voila mon probleme.
j'ait acheté recemment, une DREAMBOX DM800 HDse chinoise,et que marchait tres bien jusqu'a maintenant, puis j'ait fait une CONNERIE,j'ait volu mettre a jour le Software,et la Patatrack,au redemarrage,plus rien ne marche, le display affiche "software not coold" et je n'ait plus meme pas acces a eternet, donc impossibiliter a la reflacher.
Le probleme est que ce model,ne possede pas de Prise RS 232,donc apparement,impossible a Flacher via DreamUP.c'est pour cela que je vien vers Vous, dans l'espoir que quelq'un puisse m'aider a remettre en route mon Bijoux,possiblement pas a pas,car comme deja dit plus haut,je suis une neophite qui ne demande que a apprendre.
Merçi d'avance a tous ceux qui pouront m'aider.


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - bekalta - 10-13-2011

__frére yassinov s.v.p. réponder nous en Fr ou en Arabe pour le bien de nos membres


__merçi de votre Compréhention_


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - bip_bip - 10-27-2011

Bonjour j'ai achetter une dreambox 800 hd pvr chinoise quand je branche la dream me marque a ecran lcd drem multimedia et en dessous ====> ERROR quand je lance dreamup me donne erreur CA no found quand je lance NCf c ok me fait bien ce qui a ete marquer apres je lance Optiflasher et la impossible de se connecté cable rj45 & rs232 me donne erreur Help please.

ah oui quand la procédure et fini avec NCF me donne une ip 192.168.1.77 ce qui ne correspond pas moi c 192.168.0.xxx et non 192.168.1.77 par avance Merci de votre aide.


RE: Dreambox NO CA FOUND Repair Tool SIM2/01 EDition - tassos - 10-31-2011

I am using above tool but I get nowhere. The problem is that I cannot get the IP Address of the Dreambox800se. The box was brand new without manual and I think I messed it up, and noe I only get the blue light at the front and does not respond to remote control. I hope you can help me and I will most gratefull.tassos