+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Dead DM800HD Se (/showthread.php?tid=1441)
Pages:
1
2
Dead DM800HD Se - johnnt - 02-28-2013
DM800 HD se
-Clone
-SIM ?? no idea
-Dead box
Hi all,
I have a dm800 HD se, sim 2.10 clone and it's dead.The display is dead and the only signs of life are the green light on the tuner and the red LEDs on the eeprom.
I've connected a USB up to the service port and i get the output below. Sometimes it goes a bit further to "copy code" however it never goes any further.
I've tried optiflasher v2.0.0.4 in Advanced mode with Write IMAGE/Restore Backup but it never seems to detect the box.
Is the FSL screwed and is there anything that i can do to try and repair it?
Thanks, J
------------------------------------
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
G=00000000 R=00000000 W=00000000 00000020
K6
F
---------------------------------------
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000005
WC1=FFFFFFE2
RC2=00000014
WC2=0000002D
RC3=0000000C
WC3=FFFFFFE2
RC4=0000000C
WC4=00000037
NWC=0000000C
RC5=00000005
WC5=0000000C
RC6=00000013
WC6=0000000C
NRC=0000000C
RW=0000000F
WW=00000056
G=00000000 R=0000000C W=0000000C
BL=00000000
RC1=00000002
RC2=00000013
BL=00000001
RC1=00000003
RC2=00000014
BL=00000002
RC1=00000003
RC2=0000000E
BL=00000003
RC1=00000003
RC2=00000011
BL=00000004
RC1=00000000
RC2=00000016
BL=00000005
RC1=00000006
RC2=0000001A
BL=00000006
RC1=00000002
RC2=00000011
BL=00000007
RC1=00000007
RC2=00000015
3
COPY CODE
RE: Dead DM800HD Se - fairbird - 02-28-2013
Before every things ...make sure what sim you have (it it important to give you correct advice)
open your box remove sim carefully and see what type of sim you have..
RE: Dead DM800HD Se - johnnt - 02-28-2013
(02-28-2013, 03:36 PM)fairbird Wrote: You are not allowed to view links. Register or Login to view.Before every things ...make sure what sim you have (it it important to give you correct advice)
open your box remove sim carefully and see what type of sim you have..
Ok Sorry, it's a white sim:
DM800SE 11424
SIM210
Blank on the other side.
J
RE: Dead DM800HD Se - fairbird - 03-01-2013
So read this topic and Follow "Fix Bad Sector "Sectors Recovery"
1-select com (If doesn't connect try to change Baudrate between 57600 & 115200)
2-select Loader [LD1] For sim2
3-click settings and choose "sectors recover"
4-select [Repair No Ca Found] and choose DM800se-sim2.10-ssl84b
5-click "Do job" and turn on power to box and wait to connect with box and repair the problem.
P.s:Must be connect pc with box by both cables (Lan & mini usb)
If doesn't connect then try another pc (better xp win) and another cable
RE: Dead DM800HD Se - johnnt - 03-01-2013
hmm, ok did all that and still i can't get it to recognise the box. optiflasher just sits at Power on DB Device.
What does optiflasher look for to recognise the device ?
Also does it detect boot before looking for the lan as i'm using a cross cable and sometime that can interfere as the interface takes a bit of time to come up. On the DB the lan interface seems dead.
Thanks
J
J
RE: Dead DM800HD Se - fairbird - 03-01-2013
No...Optiflasher and any tools also detect to box directly when you open box before booting...
So if doesn't detect with box you have connection problem ... as I mentioned from mini usb cable or lan cable or pc (win)
also make sure you install correct drivers for mini usb cable try this one..download it and install it in your pc..
RE: Dead DM800HD Se - johnnt - 03-01-2013
hmm ok this is getting really frustrated. Tried 3 USB cables, a cross cable, 2 power supplies and a different PC. Also did a fresh install of win7 used the drivers supplied and still it does not detect the DB.
Installed putty and the see the boot up but only as far as the COPY CODE is then dies after that.
Suppose the only option is to try XP?? I did try XP but only in VMware player and had exactly the same.
any ideas would be useful.
J
RE: Dead DM800HD Se - fairbird - 03-01-2013
One more things, Did you try to press hold on mini flashup button at back of box and turn power on..
RE: Dead DM800HD Se - johnnt - 03-01-2013
ok thanks, already tried the different baud rates and also tried powering on and holding the mini-flash button. still no go.
there is something happening as i can see it try to boot in putty but it doesn't get very far.
any more suggestions would be great.
Is there any info on how the DB works in terms of its architecture that i could read up on?
thanks
J
RE: Dead DM800HD Se - fairbird - 03-01-2013
If you box not on guaranty:
1-Open it
2-Remove sim carefully
3-Replace it again
And try with optiflasher or press and hold mini-flash button...if not success try with "SUNRAY-FlashUP" this is especial dreamup for sim2 ...