[Request] erro1: no ca found - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [Request] erro1: no ca found (/showthread.php?tid=1312) |
erro1: no ca found - frank087234 - 12-19-2012 I flashed the wrong (orginal) image on my dm800 (clone) sim 2.01 I used opti flash , connecting to com1 usb to serial, but and follw step, but nothing happened when I turn the dm800 ON. I tested the usb/serial cable on another dm800 , no problem Please help RE: erro1: no ca found - frank087234 - 12-19-2012 I followed the steps, but no response from box "Power ON DB Device [ESC to Abort]" the device is power ON, but nothing happened, the LCD panel show same error (12-19-2012, 07:01 PM)YASSINOV Wrote:Please note I flashed dm800 with original balckhole ssl84, then got the error the boatloader which was working on the device is ssl82 Did I miss up the boatloader?? RE: erro1: no ca found - frank087234 - 12-19-2012 (12-19-2012, 07:18 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.OptiFlasher must have a response in all cases of software issue ! I have tested the cables on another device, and it was recognised easily by optiflasher. with faulty device nothing happenes!! any ideas?? RE: erro1: no ca found - fairbird - 12-19-2012 give info from hyper terminal.. see here RE: erro1: no ca found - frank087234 - 12-19-2012 nothing hyperteminal is connected, but Blank Page RE: erro1: no ca found - fairbird - 12-20-2012 In this case as Yassinov said you have connection problem, 1-Try another pc another windows. 2-Try another cable. RE: erro1: no ca found - frank087234 - 12-20-2012 ok I have another Box with Ferrari sim (Broken box got sim2.01), it is working fine. Is there anything else I can try using the working box to test? I tested the cables on it, and the yassinov softawre see the good box, but not the broken one. RE: erro1: no ca found - frank087234 - 12-20-2012 where is the expert yassin???? RE: erro1: no ca found - fairbird - 12-20-2012 Not clear... please make it more clear mhat you mean? Did you change sim Ferrari with sim2.01 or you put sim2.01 in Ferrari box ? RE: erro1: no ca found - frank087234 - 12-20-2012 I put sim2.01 in Ferrari box ? showed erro1 no ca found then change Ferrari sim in the sim2 box, showed erro1 no ca found. |