+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35)
+--- Thread: Enigma 2 Support Check Here (/showthread.php?tid=123)
RE: Enigma 2 Support Check Here - DaiC1 - 09-26-2011
Hi great pogram.
When I try to 1,write bootloader or 2,repair no ca in advance mode 2 I get as far as "Finalizing Job Phase2...Please Wait..." and it just stops there.
I'm trying to fix start up error on a 800. "Dream Multimedia error" which shows on lcd just after power up.
RE: Enigma 2 Support Check Here - DaiC1 - 09-26-2011
Yea I realise that. I think the sim is toast.
RE: Enigma 2 Support Check Here - tvworld - 12-09-2011
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: Nemesis2.4-dm800hd-SVN(101r1)-ramiMAHER.nfi
FSize: 51805840 bytes
Authorization id: 76792197
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...
Ahy solucion a este problema?
gracias y un saludo
RE: Enigma 2 Support Check Here - vebraga - 02-16-2012
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: Nemesis2.4-dm800hd-SVN(101r1)-ramiMAHER.nfi
FSize: 51805840 bytes
Authorization id: 76792197
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...
Ahy solucion a este problema?
RE: Enigma 2 Support Check Here - diviesh - 03-02-2012
I'm having the same problem when flashing, i used rs232 as my error is "sim 2XX not found" and i couldn't get it to see network
can any one assist - i'm desperate to get this box up and running
any help will be greatly appreciated
thanks
RE: Enigma 2 Support Check Here - akaperu - 03-03-2012
Hello yassinov je parle français mais aussi un peu anglais, j'ai suivi tout ce que tu as dis sur ce forum mais chez moi ça reste toujours bloqué à finalizing job phase 2 please wait.. j'ai aaussi fait avec rj45 et rs232 en meme temps et toujours la meme chose.
Please help me