+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] DM800HD Clone Sim 2.01 - No CA Found + Wrong response type (/showthread.php?tid=1138)
DM800HD Clone Sim 2.01 - No CA Found + Wrong response type - taqqin - 10-06-2012
Hi,
I have:
DM800HD Clone (Rev L Board).
Sim 2.01
I was upgrading via web.
Now i'm stuck with NO CA found error
Tried few times with NCF and everytime im getting:
Wrong boot response.
Here the result test with Hyperterminal.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #75 (20091005)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
Any help appreciated
RE: DM800HD Clone Sim 2.01 - No CA Found + Wrong response type - taqqin - 10-06-2012
Hi,
The problem have been solved.
I using others PC winXP 32bit to run Optiflasher.
Thanks.
RE: DM800HD Clone Sim 2.01 - No CA Found + Wrong response type - taqqin - 10-09-2012
(10-06-2012, 11:16 AM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.Problem solved for software or both & box repaired ?
for both software and box.
RE: DM800HD Clone Sim 2.01 - No CA Found + Wrong response type - fairbird - 10-09-2012
So...Closed Under Solved