[SOLVED] ERROR NO CA FOUND (DM800hd se genuine) - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [SOLVED] ERROR NO CA FOUND (DM800hd se genuine) (/showthread.php?tid=1085) |
ERROR NO CA FOUND (DM800hd se genuine) - NEPZSMILER - 09-19-2012 HELLO, I've tried every software to repair my dm800hd se. Even registered optiflasher but i am unable to repair my box :( My box details are : DM800hd se genuine Sim: Uknown Image :Accidentally installed image ramiMAHER Vu+ Duo BlackHole Connectors: Via usb service + Lan Used : Dreamup every version Optiflasher all version NCF all version :( Please help me out RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - fairbird - 09-20-2012 First i moved thread here in right section.. Second if you sure your box Genuine so sim card of course original 'multimedia' if you want to make sure open box and remove sim then see what is written on the sim.. To fix your box must flash right bootloader and images for Genuine box.. download from attach last bootloader for DM800se SSl84 then follow this link and flash your box by optiflasher with "Flashing by Null modem cable only without Network lan" you must have mini usb cable not Null modem cable if your box booting fine then flash original image not patched by "Flashing by Network lan only" RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - NEPZSMILER - 09-20-2012 Hi, i tried to flash it with the right bootloader with optiflasher, optiflasher disconnects when i select the right bootloader which is in.nfi format. It gets busy for a while and gets disconnected. RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - fairbird - 09-20-2012 Your box is Genuine so change Loader to LD2 for Genuine box loader then click Detect port... RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - NEPZSMILER - 09-20-2012 Hi, i did it but it says Power ON DB Device [ESC to Abort] DM800HD SE Detected ! Dreambox Detected...Ok! Sending Flash Loader... Second Stage OK! Boot Success & Ready For Job Process! Name: secondstage-SSl84.nfi FSize: 153712 bytes After this, it stops and i have 192.168.1.77 ***serial setup*** on my led of dreambox, and sim 2&4 icon as well. RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - fairbird - 09-20-2012 Please follow my tutorial carefully use Advanced2 not 1 must be use only mini usb with out lan cable.. RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - NEPZSMILER - 09-20-2012 YEAH I TRIED THE SAME THING YOU SAID VIA ADVANCED AND THEN TO THE COM3. I USED THE MINI CABLE WITHOUT LAN. RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - fairbird - 09-20-2012 Ok can you try again and take some screen shots from optiflasher then upload it here? I need to see problem message.. RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - NEPZSMILER - 09-20-2012 [attachment=245]alright here are the screenshots after the 3rd image, no success... RE: CAN'T FIX THE ERROR NO CA FOUND & 2ND FAILED - fairbird - 09-20-2012 As pictures shown, you have connection problem..are you sure mini usb cable and Lan cable work well? Or try to use another windows and xp better.. |